|
|
|
Replacing Fuses
Automotive circuit protection
Tom Morr / autoMedia.com
|
Electrical problems can present one of the biggest troubleshooting challenges in automobiles. Unlike flat tires or other easily visible problems, electrical shortcomings can be tough to track down.
Fuse Function
Fuses are one electrical bug that the average motorist can diagnose and fix.
Although many auto-electrical problems are better left to professionals in these days of computer-controlled vehicles, fuses are one common electrical bug that the average motorist can diagnose and fix. Basically, fuses are an intentional weak link in an electrical circuit. If too much current flows through the circuit for whatever reason, the fuse is designed to "blow" and stop the flow before electrical components are damaged, wires melt and cause a fire, and/or other nasty things. If a car's electrical accessory (such as the horn or radio) mysteriously stops working, the average motorist can potentially save a trip to the shop by checking the fuses first. Typically, fuse panels or "blocks" are located near the steering column, under or below the glovebox or in the engine compartment.
Fuse Types
Modern cars use either glass or blade-type fuses. Cylindrical-glass fuses aren't as common these days, and the more user-friendly blade-style "ATO" fuses began appearing in the '70s. (The two subspecies of ATO fuses are the early ATM style and smaller ATC configuration, which was introduced in the '90s.) They all perform the same function: When electrical current exceeds the circuit's capacity, this overload causes a wire inside the fuse to pop open, which stops the flow of electricity before further damage can be done.
Fuse diagnosis is straightforward: Look at the wire inside the fuse to see if it's continuous or "blown" open. If it's blown, remove and replace the fuse with one that has the same voltage and amperage rating. (Blade-type fuses are color-coded for easy selection.) Inexpensive plastic tools help remove the fuse without damaging it.
Electrical Problems
Unfortunately, the caveat here is that the original fuse blew for a reason. Even worse, fuses normally don't malfunction due to age or wear-and-tear. These are the two prominent causes of auto-electrical problems:
Copyright autoMedia.com 2000-2008
|
|
|
|
|
|

The two most common automotive fuses are the glass style (left) and blade-type (known as ATO, ATM or ATC). Glass fuses' amperage ratings are imprinted in tiny numbers on their metal ends. Blade fuses are color-coded for idiot-resistance (i.e., red is always 10 amps and so on).
|

Locate the panel and look for a blown fuse. These days, most panels are labeled for easy fuse/circuit/device identification.
|

Faulty fuses can usually be spotted while still in the panel. Look for broken wire inside the fuse or discoloration.
|

Special tools are available that assist in pulling and installing fuses without causing further damage; glass fuses are particularly fragile. Some pullers even have a built-in tester to check difficult-to-eyeball fuses.
|
|
New Pony for 2010 Ford MustangThe countdown is on for when the 2010 Ford Mustang will compete head-to-head with the new Chevrolet Camaro and Dodge Challenger. Anxious to enter the ... more... |
|
|
|
Re: 2003 Cavalier brake noiseDOES IT SOUND LIKE A CLICKING NOISE WHEN YOU ARE TURNING, THEN IT IS YOUR CV JOINT, IF IT HAS A HUMMING NOISE AND IT GET LOUDER WHEN YOU TURN THEN IT ... more... |
|