|
|
Rearview mirror adhesives are typically a 2-part system. They can be found at auto-parts stores and in the automotive sections of warehouse/mart-type stores. This one cost about $2.00. First, remove the mounting "button" from the mirror. This mirror uses a T-15 Torx screw to fasten the two.
|
On the outside of the window, mark the mounting location with a crayon or grease pencil by circling the old adhesive residue.
|
Scrape old adhesive off of the windshield and mounting button. Then wipe both with rubbing alcohol on a paper towel or clean cloth.
|
Squeeze the activator chemical's vial to send the fluid to its felt tip, then apply the activator to the mounting location on the windshield. Let dry for two minutes.
|
Cut the cap off of the adhesive bottle and apply one drop to the center of the mounting button's windshield side.
|
Promptly press the button in the mounting location, correct side up, and hold in place for a minute.
|
Allow the adhesive to dry for at least 15 minutes, then reattach the mirror to the button.
|