Performance
Print this Email this diggDigg this! del.icio.us

Just as a good tracker can tell a lot from a trail of footprints, the tread design of a tire reveals much about its traits. You don't have to be Tonto, though, to figure out what the trail signs mean. Tire manufacturers make a wide range of truck and SUV tires designed for specific types of terrain. (See Part I of this feature for details on sizing, performance and suspension issues.) For instance, if you have an "asphalt four-wheeler," you can choose a tire design that works best on pavement such as one with an all-season tread pattern. All-season tires are designed for the average four-wheeler whose vehicle spends 95 percent of the time on-road and the other five percent on dirt or gravel roads.

Season to Surface
All-season tires are generally not constructed as beefy as some other designs, so they're more easily damaged when driving off-road. They work great in snow, however. Moving toward the purely off-road end of the spectrum, all-terrain type tires are just that—all-terrain. They can provide good performance in a wide variety of conditions, but don't excel in any one area. These heavy-duty tires have extra plies under the tread and in the sidewalls. Road noise is low, mileage is high and the better designs work well off-road.


For even more off-road utility, Baja-terrain tires are extremely heavy-duty tires designed for the off-road or desert racer that must endure a lot of punishment. Although they work very well, these tough tires can be expensive.

Be honest with yourself about the real-world use of your truck or SUV.
If you don't plan to go off-road in the dry desert, a mud-terrain tread has large lugs and open areas to handle, you guessed it, muddy conditions (rock crawlers like them, too). The void areas provide a channel for the mud between the tire's lugs to escape, so the tread doesn't become packed with goo and lose traction. The large voids help the tread to fling mud off (that's how those off-road trucks get so dirty) and prevent the tire from turning into a slick. The voids also offer good snow traction when driven off-road, but for snow on pavement, an all-terrain works better. Before you throw a set on your truck, keep in mind that mud-terrain tires are noisier on the highway compared to the less aggressive tread designs, and also wear out more quickly. On the other hand, these mud designs are also good performers in the rain because the large voids also route the water away from the main tread.


Now if you want to get really down and dirty, mud boggers have even larger voids for increased self-cleaning capability in extreme off-road conditions. This allows them to grab tight, spray mud, climb boulders and howl on the highway. While some rock crawlers prefer this tire design because they think the big lugs help the tires to grab the rocks, others believe a tighter tread pattern works better on rocks because of the greater contact patch.

Continued on Page 2

Copyright autoMedia.com 2000-2008

 
Related Photos More Photos...

To lift the ...
stock spring reduction
Approximatel...

These AVO an...

The C-E shoc...
leaf spring removal
The leaf spr...
tubular upper arm coil-over shocks
The tubular ...


Related Articles
Install Adjustable Camber Plates
Rear Brace Installation
Air Springs Install
High Rise Construction
Off-Road Tire Tech, Part 1


autoMedia Car Blog
Toyota iQ Wins Japan Car of the Year Award
Typically, an automotive award from overseas wouldn’t grab our attention. However, the diminutive Toyota iQ cleaned house to claim the 2008 Japan Car ... more...

Monster Trucks Launch an Urban Assault
Watching monster truck racing on television or even in person, one cannot help but crave driving one of those behemoths. The sheer power (often north ... more...

Jeep Begins Military Production
The headline reads like it fell off a decades-old newspaper, recalling past conflicts when Jeep put soldiers into action. Yesterday, Chrysler LLC and ... more...


Forum Highlights
mercury monterey 1955 4 door sedan
im restoring a mercury monterey 1955 and i am looking for the tail light lenses mine are stress crack. Does anybody know where can I buy the ... more...

Finding Yr, Make & model of a part number
Please help me find a website where I can put in the part number (vintage (1950-70) and find out which vehicle it fits. No luck so far. Thanks bj more...

NOS auto parts
Hope someone can help me. I have acquired a lot of vintage (1950-1970) auto parts, but the boxes only have the part number on them. I need to find out ... more...


Car Buying Guide

QUICK SEARCH:


Specs, prices, photos & more
SEARCH BY BODY STYLE:
FREE New Car Price Quote
Get the best price - it's easy!
Zip Code

Used Car Buying Guide


2000-2008 autoMedia.com Inc. All Rights Reserved.