CarCare
car pinstipe application

Pinstripes and fancy automotive graphics have origins that stretch back, really, to cave paintings. We humans like to make things our own, and automobiles are no exception. A plain paint job on a plain old car says simply, "I'm a plain old person." Add some pinstripes or otherwise differentiating accents and another picture emerges. A subtle stripe around a gas cap sends one signal, while a full-blown flame job sends another. Either way things are no longer plain.

Vinyl Exam
In the past, custom paint had to applied by skilled professionals and legends like Von Dutch, Gene Winfield, or Tommy the Greek. As time and technology marched, some custom paint was replaced by the miracle of plastics, namely vinyl. Whether installed at the factory, the dealership, or laid down out in the driveway, vinyl striping and graphics are relatively quick and easy to apply, compared to the skilled employ and time involved with a custom pinstriper or painter. Add to the miracle of plastic that of computer aided design, and vinyl graphics have become more prevalent than ever before.

Cracked Up, Checked Out
While vinyl is tough and can last for years, like anything exposed to the punishment of time and weather, it will wear out. Add to the mix swinging car doors, errant shopping carts, and pesky teenagers with a penchant for peeling things up and the vinyl can take a hit from which it cannot recover. Since the vinyl is essentially a very thin custom cut sticker, once things are cracked up and checked out, total replacement is the only option. If replacing the graphics, the first step is peeling up the old stuff.

Slow Hand
The key here is not to go crazy and peel everything up at once. Work one section at time in order to place the new vinyl in the same location as the old. If applying vinyl to an otherwise naked paint job, the old "measure it twice, cut it once" philosophy applies. You only get one shot at laying vinyl down. It will not survive being peeled up and re-applied. The other "trick" to applying vinyl is keeping things clean. Even the smallest speck of crud under thinner-than-paper vinyl will read to the eye as a bump. Prepare well, and follow along for more visual tips.


Copyright autoMedia.com 2000-2009



 
Photo Guide
removing old vinyl pinstripes
Peeling up the old stuff is the first step if replacing vinyl. Using a heat gun, letting the car sit in the sun, applying adhesive remover, or even turpentine can help remove adhesive residue. ALWAYS test any solvents on a hidden spot first. Some solvents can quickly destroy paint.
applying vinyl pin stripes and removing backing paper
Test-fit a section of the vinyl before removing the backing paper. The backing paper is on the side of the vinyl that goes on the paint. The back, as it were. The carrier paper is the side of the vinyl facing out. It carries the vinyl while you work.
clean car surface with soap and water before pinstripe application
Make sure the painted surface is cool, not sun-baked. Prepare a mix of clean soap and water. Apply to area with a clean cloth or sponge. Plain old spray window cleaner can also be used.
Position the vinyl pinstripe
The soapy water or window cleaner will allow vinyl to slide around freely, making it slippery when wet. Position the vinyl where you want it to be.
use squeegee to remove water and air bubbles
Use a squeegee to force the water and any air bubbles out from under the vinyl. Squeegees are available at the auto parts or auto paint store.
slowly peel up carrier paper
Let things set up and dry out. S-l-o-w-l-y peel up the carrier paper. If the vinyl moves—STOP, and let things set up some more. Trim any excess after things have dried. Do NOT poke holes in any bubbles. The bubbles should settle flat with sun and time.



Related Articles
Finding Auto Repair and Service Manuals
Automotive Chemical Disposal and Recycling
Parts and Labor
Oil Filter Form and Function
Garage Storage and Working Space


autoMedia Car Blog
Toyota Announces Unintended Acceleration Fix
In a safety drama that has unfolded since summer, when a high-profile case of unintended acceleration brought floor mat issues to national prominence, ... more...

Sneak peek: 2011 Kia Amanti
Kia unveiled its all-new K7 sedan in Korea today, offering the world a sneak peek at a car known as Cadenza in the Middle East and Amanti in North Ame ... more...

Koenigsegg Hits Brakes On Deal to Buy Saab
Koenigsegg Group has walked away from a proposed purchase of Saab from General Motors. The conglomerate lead by supercar-maker Koenigsegg had previous ... more...


Forum Highlights
oldsmobile -TCC
 I have a 1998 oldsmobile, achieva,  v6, auto transmission, 135,000 miles, it seemed to be missing , after changing plugs and wires, throttl ... more...

Re: Aluminum wheels and a flat tire
I am sure you have your tire changed by now, but this is a common problem when using aluminum wheels.  Once you realize you have a problem, hitti ... more...

Re: Chevy 3.8L Engine cutout
 I would call it in intermediate job.  You will need some special tools to do it, but if you have some experience doing repairs, and not jus ... more...


Car Buying Guide

QUICK SEARCH:


Specs, prices, photos & more
SEARCH BY BODY STYLE:
FREE New Car Price Quote
Get the best price - it's easy!
Zip Code

Used Car Buying Guide



2000-2009 autoMedia.com Inc. All Rights Reserved.