|
|
Required items: a replacement, sealed-beam lamp and the appropriate screwdriver(s)?usually a Phillips-head (right), sometimes a Torx (left).
|
For easier access, remove the headlight trim piece if so equipped. This plastic trim ring is attached with a T-15 Torx screw at each corner.
|
Unscrew the headlight bezel. This lamp is secured with four Phillips-head screws (two on top and two below).
|
With the bezel removed, the lamp can easily be removed and unplugged from its wiring connector.
|
Plug in the new lamp and reverse the disassembly steps. Always check headlight aim when replacing a lamp.
|