Restoration
Continued from Page 1
Staying Ahead
With such a crowded field, it is no wonder that Mustang sales were off from previous years, with "only" 472,121 sold in 1967. The Camaro was a comparatively distant second at 220,917, besting the Cougar (123,672), the Firebird (82,560) and the Barracuda (62,534). Although the Mustang was still the king, it was obvious things were going to get tougher. Production of the Shelby models was shifted to Ford, and they began to lose their performance edge.


For 1968 Ford made few changes, adding an optional 390-hp 427 engine to counter the 396 threat (just in time for Chevy to add a 427 of its own). There were also a number of minor body trim changes, including a deeply inset grill and rear quarter panels with integrated side scoops. A large number of safety features were added as well, such as a padded instrument panel and an energy-absorbing steering column. But times were getting tougher and 1968 sales slipped to 317,404 units. The AMC Javelin entered the ponycar frey, but never managed much in total sales.

Big Boss
Ford responded to the faster Camaro and Firebird models with a major Mustang revamp. The 1969 model was restyled and the suspension upgraded. The hardtop, fastback and convertible models were highlighted by special versions like the Grande, Mach I and Boss 302. The Grande was a luxury hardtop with a vinyl roof, fake wood trim and extra insulation. The Mach 1 featured the new 351-inch engine and had the famous "shaker" scoop that projected through the hood. Also new for 1969 was the very hot Boss 302, styled by Larry Shinoda and equipped with an excellent 302. The 1970 Boss was also offered with a 429-inch V-8, while the Mach I got the 428. The de-clawed Shelby Mustangs drew their last gasp in 1970, but by then they were so far from their original intent it could have been considered a mercy killing. Despite the improvements, and winning the 1970 Trans-Am championship, Mustang sales dropped from 299,824 in 1969 to 190,727 in 1970.

Sales Slip
With sales falling, Ford made major changes to the 1971 Mustangs. The new model was longer, wider and over 600 pounds heavier than a 1965 model. There were still a bewildering number of engine options, including a 200-inch six, and three V-8s: a 302, 351 and 429. The Boss 302 became the Boss 351, and the Mach 1 was equipped with the 429 Cobra Jet engine developing 370 hp. Actually, the Boss 351 was much better balanced and a touch faster than its big brother.


The ponycar fad had run its course and, although the Mustang still outsold its competitors, only 149,678 Mustangs were sold in 1971 and 125,093 the next year. The 1973 Mustang was a carryover from 1972, and little was changed except that the best car in the lineup, the Boss 351, was dropped. Ford announced that the 1973 Mustang convertible would be its last ragtop, and this accounted for sales going up to 134,867 units as collectors reached for their pocketbooks.

Continued on Page 3

Copyright autoMedia.com 2000-2009



 
Related Photos More Photos...

Your own Cor...
lamborghini coutach
What every L...

Dino 308 GT4 Exterior Photo
The Dino 308...

Although it ...

The '66 GTO'...



Related Articles
Ford Mustang: 1994-2004
Ford Mustang: 1979-1993
Ford Mustang: 1974-1978
Ford Mustang: 1964-1966
1955-57 Ford Thunderbird


autoMedia Car Blog
Toyota Announces Unintended Acceleration Fix
In a safety drama that has unfolded since summer, when a high-profile case of unintended acceleration brought floor mat issues to national prominence, ... more...

Sneak peek: 2011 Kia Amanti
Kia unveiled its all-new K7 sedan in Korea today, offering the world a sneak peek at a car known as Cadenza in the Middle East and Amanti in North Ame ... more...

Koenigsegg Hits Brakes On Deal to Buy Saab
Koenigsegg Group has walked away from a proposed purchase of Saab from General Motors. The conglomerate lead by supercar-maker Koenigsegg had previous ... more...


Forum Highlights
oldsmobile -TCC
 I have a 1998 oldsmobile, achieva,  v6, auto transmission, 135,000 miles, it seemed to be missing , after changing plugs and wires, throttl ... more...

Re: Aluminum wheels and a flat tire
I am sure you have your tire changed by now, but this is a common problem when using aluminum wheels.  Once you realize you have a problem, hitti ... more...

Re: Chevy 3.8L Engine cutout
 I would call it in intermediate job.  You will need some special tools to do it, but if you have some experience doing repairs, and not jus ... more...


Car Buying Guide

QUICK SEARCH:


Specs, prices, photos & more
SEARCH BY BODY STYLE:
FREE New Car Price Quote
Get the best price - it's easy!
Zip Code

Used Car Buying Guide


2000-2009 autoMedia.com Inc. All Rights Reserved.