Restoration
Print this Email this diggDigg this! del.icio.us

From the dawn of hot rodding to the present day, one carburetor has always been synonymous with traditional hot rods—the Stromberg Model 97. Although the Stromberg Company built millions of other carburetors from the 1930s to 1974, the Model 97 stood out as the carburetor that fed the hot rod movement.

Innocence
Stromberg really got off the ground in 1934 when Ford replaced the single-barrel Detroit Lubricator carburetor on its V-8 engines with a two-barrel Stromberg Model 40. The Model 48 followed in 1935, and then the Model 97 became standard on Ford flathead V-8s from 1936 to early 1938.


Variants of the 97 included the visually similar but smaller Model 81 that was standard on the 1937 Ford V-8-60 base engine. And the Stromberg Type 1 was an aftermarket version of the 97 that was sold by Bendix (which bought Stromberg in 1929). There were also similar models built for other manufacturers such as Studebaker and Packard, so there definitely was no shortage of Strombergs in the 1950s.


Hot rodders were just coming to grips with engine modifications in the late 1940s and early 1950s. They understood that as they increased displacement or added hotter cams, they would need more fuel and air squirted in the top. In those innocent days most racers didn't have a clue as to how to convince more air to flow into the heads, so they just added more carburetors on top. The Stromberg was an ideal tool for this job.

Simplicity
Early performance intake manifolds were designed to mount multiple Strombergs. Most common on hot street flatheads were two-carb manifolds, but serious racers used three or more. As bigger OHV engines from Chrysler and Cadillac appeared on the scene, manifolds mounting up to six carbs became common. These "log" manifolds (so named for their round shape) were flow-bench disasters, but they were better than nothing. They may have produced flat spots in the power curve and little low-end power, but they looked really awesome. Popping the hood to ogle six Strombergs gasping for breath was a stirring sight at many a drive-in on a Friday night.

Continued on Page 2

Copyright autoMedia.com 2000-2008

 
Related Photos More Photos...

Check a serv...

Our broken h...

The right to...

The first st...
traction bar
battery relocation steps
Place the ba...


Related Articles
Holley 4-barrel Carburetor Rebuild
Corvette Restoration: The Engine
Engine Rebuilding: The Camshaft
Engine Rebuilding: The Preparation
Engine Rebuilding: The Crankshaft


autoMedia Car Blog
Sneak Peak: 2010 Volkswagen GTI MK VI
Volkswagen took the wraps off its Golf GTI Mk VI concept at the Paris Motor Show, revealing the next-generation of the beloved hot hatch. We have seen ... more...

Ford Tells Teens: MyKey, Not Yours
The electronic whizzes at Ford have followed up the Sync multimedia system with another clever feature, MyKey. Designed as a tool for parents to encou ... more...

Let’s Make a Deal: Toyota Zero-Percent Financing
With car sales plummeting, manufacturers and dealers alike are pulling out all the stops to drive showroom traffic. Given that credit has been a chall ... more...


Forum Highlights
ford timing belt on a 99 ford ranger four cylinder 2.5l
I put a new timing belt on because the old one snaped.  I got the tdc marks lined up right I think.  And the engine still wont fire off.&nbs ... more...

1994 MITSUBISHI DIAMANTI 3.0 DOHC HELP TIMING
I CANNOT FIND A BOOK OR DIAGRAM ON THIS,NEED HELP WITH RE-PLACING THE BELT,IT IS BROKE,WE JUST TURNED THE CAR OFF AND IT WOULD NOT START,AFTER SEVERAL ... more...

'89 GMC p/u - rusted part
Have a coolant leak.  Don't know what the part is called. Two hoses come from the firewall (heater element), one goes to the upper radiator.  ... more...


Car Buying Guide

QUICK SEARCH:


Specs, prices, photos & more
SEARCH BY BODY STYLE:
FREE New Car Price Quote
Get the best price - it's easy!

Used Car Buying Guide


2000-2008 autoMedia.com Inc. All Rights Reserved.